Vehicle access solutions
Explosives Detectors
Metal Detection
X–ray Inspection
Food Safety
BIO-Medical
Surveillance systems
Turnstiles
Automatic Gates
Fire alarm & firefighting
Access control System
GPS Tracking
Parking Guidance Systems
RFID
Traffic Signal control
Cantilever Sliding Gates
The automatic cantilever sliding
gates are manufactured from RHS sections of sufficient
strength to suit operating requirements which are
dependent upon automatic cantilever sliding gates
opening width, height, type of infill
(windloading/weight) and the level of security required.
The automatic cantilever sliding gates can span openings of six metres (single leaf) or up to 10 metres (double leaf) , subject to gate height and infill.
The cantilever gates have 2 sets of guide posts with tension wheels to hold the leaf in the vertical position. Automatic cantilever sliding gates are driven by a rack and pinion system.
Cantilever Sliding Gates require no track or support across the roadway. The automatic cantilever gates leaf is supported by a cantilever support carriage. Cantilever Gates have been designed to withstand high flows of traffic and varying environmental conditions. A variety of sizes infills and finishes are available to suit individual site applications.
Safety Options - In accordance with the Workplace (Health, Safety and Welfare) Regulations 1992, BS EN 12453:2001 and BS EN 12445:2001 it is highly recommended that the following items are fitted to your automatic sliding gate.
Safety Edge to leading edge of gateleaf - to prevent gates closing on a person or vehicle in the event it is activated.
Additional safety edges to internal and external motor posts
Weldmesh infill
Sliding Gates post mounted audible alarm or flashing beacon
Pedestrian guard rail around run-back area. This is to prevent injury to a person, should they stray into that area whilst the sliding gates are operating.
Safety induction loops cut into the road surface. This will inhibit automatic sliding gates closing on to a vehicle within the aperture, if detected.
Safety photocells. Act as additional safety for pedestrians and high lorries.
 |
 |
The automatic cantilever sliding gates can span openings of six metres (single leaf) or up to 10 metres (double leaf) , subject to gate height and infill.
The cantilever gates have 2 sets of guide posts with tension wheels to hold the leaf in the vertical position. Automatic cantilever sliding gates are driven by a rack and pinion system.
Cantilever Sliding Gates require no track or support across the roadway. The automatic cantilever gates leaf is supported by a cantilever support carriage. Cantilever Gates have been designed to withstand high flows of traffic and varying environmental conditions. A variety of sizes infills and finishes are available to suit individual site applications.
Safety Options - In accordance with the Workplace (Health, Safety and Welfare) Regulations 1992, BS EN 12453:2001 and BS EN 12445:2001 it is highly recommended that the following items are fitted to your automatic sliding gate.
Safety Edge to leading edge of gateleaf - to prevent gates closing on a person or vehicle in the event it is activated.
Additional safety edges to internal and external motor posts
Weldmesh infill
Sliding Gates post mounted audible alarm or flashing beacon
Pedestrian guard rail around run-back area. This is to prevent injury to a person, should they stray into that area whilst the sliding gates are operating.
Safety induction loops cut into the road surface. This will inhibit automatic sliding gates closing on to a vehicle within the aperture, if detected.
Safety photocells. Act as additional safety for pedestrians and high lorries.
Key Features
|
Benefits
|
Technical Specification
|
Options Available
|
| Home | About Us | Contact Us | Site Map | Follow us
.png){kind=icon}  |
Copyright © 2015-2016
Matrix-Security.com.sa
All Rights Reserved.
Designed by eLnow.net